Warning Lights; Battery Replacement - Beta Motorcycles RR 125 LC Mode D'emploi

Masquer les pouces Voir aussi pour RR 125 LC:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 152
2

WARNING LIGHTS

1 Headlight indicator
The system activates the
indicator in synchrony
with the activation of the
mains beams.
2 Turn indicator lights
The system activates the
indicator in synchrony with the activation of the turn indicators.
3 Neutral indicator light
The system activates the indicator in synchrony with the engaging of the neutral.
4 Engine overheating indicator light
If the warning light comes on, stop the engine. Immediately contact an authorised
Betamotor dealer.
WARNING: Do not open the radiator cap when the engine is hot.
5 MIL indicator light (Engine management system fault)
Indicates a fault in the engine management system. Contact as soon as possible an
authorized Betamotor.
EN
1
2
4

BATTERY REPLACEMENT

Follow this procedure for proper instal-
lation.
The meter includes an internal battery
(CR2032). This battery shall be replaced
only when power runs out.
For replacement remove the headlight
mask. Remove the battery cover located
behind the instrument and pull out the
battery.
In order to install the battery properly, push
the battery as shown on figure to make
1
sure the battery is placed underneath the
metal tab (1).
24
WARNING:
Not following this procedure could
result in permanent damage to the
meter.
3
2
5

Publicité

Table des Matières
loading

Table des Matières