Front Brake; Check The Level Of The Front Brake Fluid; Restoring The Level Of The Front Brake Fluid; Bleeding The Front Brake - Beta Motorcycles RR 125 LC Mode D'emploi

Masquer les pouces Voir aussi pour RR 125 LC:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 152

FRONT BRAKE

CHECK THE LEVEL OF THE FRONT
BRAKE FLUID
Check the oil level by means of oil win-
dow 1.
Minimum oil level must never be below the
level of window.
RESTORING THE LEVEL OF THE
FRONT BRAKE FLUID
To restore the oil level, top up by unscrew-
ing the two screws 2, lifting cap 3 and
adding oil.
WARNING:
If the lever feels soft, there may be an air bubble in the circuit, then contact authorised
Betamotor authorised service immediately.
NOTE:
Use the liquid indicated on page 16 in the "Recommended lubricants and liquids"
table.
WARNING:
The brake fluid is extremely corrosive. Take care not to spill it on the paintwork.
Wear appropriate protective clothing and protection gloves.
Keep coolant out of reach of children.
WARNING:
Avoid any direct contact of the liquid with skin, eyes or clothing.
If this happens:
- with the eyes, rinse immediately with plenty of water and seek medical advice.
- with skin, immediately clean contaminated areas with soap and water. Change
clothing that is contaminated with liquid.
If liquid is swallowed, contact a doctor immediately.

BLEEDING THE FRONT BRAKE

To bleed the braking system, please contact an authorised Betamotor service centre.
43
3
2
1
4
EN

Publicité

Table des Matières
loading

Table des Matières