Closing The Housing - Pfannenberg PY X-M Serie Instructions D'utilisation Et De Montage

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Approvals

(valid for marked equipment)

Construction

PY X-M-05-SSM + PY X-M-10-SSM: VdS 0786-CPD-21499

Product

Rated voltage

Regulation

(305/2011/EC )

Operating voltage range acc. to EN54-23

Lens colours

Signalling area

Environmental protection class

Installation position

Testing takes place using the supplied diaphragm nipple and the outer fastening bores.

PY X-M-05-SSM + PY X-M-10-SSM:

VdS

Lens colours: White, yellow, amber, green, blue. These lens colors are not certified according to EN54-23 and are not be

used for alerting in case of fire.

PY X-M-xx + PY X-MA-xx

Rated Voltage

UL, cUL

Amb. Temp.

115V AC

230V AC

PYRA Xenon beacons PY X-M(A)-xx comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

Taking into Operation

Safety notes:

- Installation must be carried out by an electrician in compliance with the latest codes and regulations.

- Danger: High voltage may be present.

- Prior to opening, it must be ensured that no voltage is applied to the device.

- Before electrical connection, the supply voltage on the type plate is to be checked. The wrong operating voltage can lead to

damages or to the destruction of the equipment.

- During installation it must be ensured that the connection cables are secured against tension and distortion.

Please observe: The devices are not designed for portable use.

- CAUTION: When making installation, route field wiring away from sharp projections, corners and internal components.

- The function of the unit is only guaranteed if the upper and lower section is joined correctly.

- In order to prevent detriment to sight, continuously looking directly in the activated light is to be avoided.

- DC voltage: The device is provided with a reverse polarity protection. No function when polarity is reversed!

Opening the housing

3/8

The unit is not closed when delivered. Sealing plugs for the housing screws are available as accessories.

085 501 987j

Visual Signal Appliance - General Signaling Equipment (UEES, UEES7) (PY X-M-xx)

Audible and Visual Appliance for General Signaling (Non Fire Alarm) Use (UCST, UCST7 and UEES,

UEES7) (PY X-MA-xx)

115V AC or

230V AC or

12.5V DC – 48V DC (PY X-M-05 and PY X-M-10) / 24V AC (PY X-M-05 only) or

12.5V DC – 48V DC (PY X-MA-05 and PY X-MA-10) / 24V AC (PY X-MA-05 only) or

24V DC (PY X-M-05-SSM and PY X-M-10-SSM) or

24V DC (PY X-MA-05-SSM and PY X-MA-10-SSM)

-40°C .. +66°C

Suitable for indoor and outdoor use.

Warning: Not to be used as a Visual Public Mode Alarm Notification Appliance.(PY X-M-xx)

Warning: Not to be used as an Audible and Visual Public Mode Alarm Notification Appliance.(PY X-MA-xx)

According to CSA-C22.2 No. 205-12 clause 4.3.4 the connection is limited to max. six leads.

Installation:

The units shall be installed indoors or outdoors in accordance with the manufacturer's installation

instructions as well as the National Electrical Code (NFPA 70) in US. In Canada, they shall be installed in

accordance with the Canadian Electrical Code, Part 1. The installations shall also be in a manner

acceptable with the local authority having jurisdiction.

By loosening the four

cover screws, the upper

section can be re-

moved.

EN 54-23 Category O: see document 30360-005-1

G216036, data see Construction Product Regulation (305/2011/EC

G217037, data see Construction Product Regulation (305/2011/EC)