Troubleshooting - Vitrifrigo FG Serie Manuel D'installation Et Mode D'emploi

10

Troubleshooting

The following table serves to provide some suggestions concerning
the checks to be made in case of incorrect refrigerator operation.
If, after completing the suggested checks, the refrigerator is still not
operating regularly, contact your nearest assistance service.
Problem Probable Cause
The refrigerator
does not start
The refrigerator
is noisy
The cooling
power of the
refrigerator is not
sufficient
The cup warmer
does not work
171064.UNI – rev. 04
Power supply Make sure that the power cord is correctly plugged into the power
socket
Make sure that the automatic breaker on the system's electrical panel
is on
Make sure that the power cord is not damaged and/or broken
Thermostat Make sure that the digital thermostat is set to "ON"
Position Make sure that the refrigerator has been properly levelled
Make sure that the refrigerator is not in contact with furniture or other
items that might increase its vibrations
Refrigerant pipes Make sure that the pipes and / or components of the refrigerant circuit
are not touching. This is a check that must only be carried out by a
specialist service technician
Door closure Make sure that the door is correctly closed and also that the gasket
is not damaged in any point
Position Make sure that the refrigerator is not too close to heat source
Condenser Make sure that the refrigerator is positioned in order that the
condenser air can be discharged correctly
Make sure that the condenser fan is rotating correctly
Check the condenser for dust and clean it if necessary
Defrosting Make sure that the inside of the refrigerator is not excessively
covered of ice. Defrost it if necessary
Thermostat Make sure that "AUX" is displayed in the digital thermostat
Power supply Make sure that the electrical connection is not damaged. This is a
check that must only be carried out by a specialist service technician
Solution
EN