Troubleshooting Guide - Vitrifrigo D20A Manuel D'instructions

11. TROUBLESHOOTING GUIDE

What to do if the fridge doesn't work
Problem Cause
No electrical current
The refrigerator
does not start
Perform a reset
The refrigerator Insufficient
does not cool output
The internal
The refrigerator
temperature is too
does not stop
high
The refrigerator
is noisy
If you do not manage to achieve regular operation after these checks, contact the
customer assistance service.
• Check that the power supply cable is intact and properly
connected.
• DC mode:
- Check that the battery is charged.
• Check that the voltage on the terminal block of the appliance's
electronic device is the same as that of the battery.
Disconnect the power cable. Wait for a minute and then reconnect it.
Try switching the unit on again.
Check that:
(a) the door closes hermetically,
(b) the refrigerator is not near heat sources and is sufficiently ventilated,
(c) the condenser is not clogged with dust
Check that the door is completely closed
Check that the refrigerator sits flat and is not in direct contact with any
object that might cause vibrations
Solution
ENG 25