Connecting The Power; Connecting Audio; Network Connection & Ip Assignment - Eneo IEP-63M2812M0A Guide D'installation Rapide

Connecting the Power

Connect power of 12VDC for the camera.
When using a 12VDC adapter, connect the positive (+) pole to the ' + ' position and the
negative (-) pole to the ' - ' position.
• Be careful not to reverse the polarity when you connect the power cable.
• A router featuring PoE (Power over Ethernet) can also be used to supply power to
the camera.
• For the power specifications, refer to the Appendix, Product Specification in the
User Manual.
• If PoE and 12 VDC are both applied, the camera will be supplied with power from
PoE.

Connecting Audio

Connect Speaker to Audio line output and external Mic to Audio input line.
Network Connection & IP assignment
The eneo scanning device tool is used to locate all eneo network cameras in a local net-
work. The tool does not need to be installed with a setup program. The program exe-file
can be started directly from the CD with a simple double click to use the program.
After pushing the button „Find eneo devices" you will get a list of cameras connected to
the local network. Highlight your camera in the list and open a context menu with a click
of the right mouse button.
EN
9