Connecting The Network; Connecting Alarms - Eneo IEP-63M2812M0A Guide D'installation Rapide

Connecting the Network

Connect a standard RJ-45 cable to the network port of the camera. Generally a crossover
cable is used for directly connection to PC, while a direct cable is used for connection to a
hub. You can also use a router featuring PoE (Power over Ethernet) to supply power to the
camera.

Connecting Alarms

AI (Alarm IN): You can use external devices to signal the camera to react on events.
Mechanical or electrical switches can be wired to the AI (Alarm Input) and G (Ground)
connectors.
G (Ground): Connect the ground side of the alarm input and/or alarm output to the G
(Ground) connector.
AO (Alarm Out): The camera can activate external devices such as buzzers or lights. Con-
nect the device to the AO (Alarm Output) and G (Ground) connectors.
8
Micro-SD Card Slot
Reset Button