Sportplus SP-MR-008 Instructions D'utilisation page 30

5. ASSEMBLY INSTRUCTIONS
2. Step
Remove the hex screw (31) and pull the lock pin (32) from the frame (1). Then slide the roller
rail (6) into the frame (1). First fasten the roller rail using the hex screw (31), 1 washer (14),
and 1 cap nut (23), then fasten the screw knob (33) and 1 washer (58) to the frame (1).
Finally, reinsert the lock pin (32) into the front hole on the frame (1).
NOTE: To collapse the rowing machine, loosen the screw knob (33) and the lock pin (32),
then fold up the roller rail. To secure it after folding up, reinsert the lock pin (32) into the
frame (1).
Remove both hex screws (9) and spacers (10) from the rear end of the roller rail (6). Slide
the seat (22) onto the roller rail (6).
Mount the spacers (10) to the roller rail (6) with 1 screw (9) each. Also fit the end caps
(28/29) to the end of the roller rail (6).
30
SP-MR-008-IM-V01-INT.indb 30 4/20/2021 12:45:48 PM