Cleaning Of The Outer Parts (Daily / Weekly); Clean The Internal Parts (Monthly); Clean Specific Materials - Arneg Ankara 4P Manuel D'installation Et De Service

Ankara 4P - Arka 4P
English
CAUTION!
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT aim the jet directly at the varnished or plasti cised surfaces
DO NOT apply the detergents directly onto the surfaces to be cleaned
DO NOT use steam cleaning equipment
DO NOT use excessive force
DO NOT bring the jet too close to the dirt. This may cause injury to the operator and conta-
minate parts that have already been cleaned, as well as the environment.
avoid detergents from coming into contact with nearby products.
CAUTION!
Floor products. Vapours. Corrosion. Breathing diffi culty.
avoid contact, inhalati on.

23.3 Cleaning of the outer parts (Daily / Weekly)

Clean all external parts of the cabinet every week. See "General instructi ons" chapter 23.2.

23.4 Clean the internal parts (Monthly)

Refer to chapters 23.1 and 23.2 and proceed as follows:
Step
1 remove all the products from the cabinet
2 remove all the removable parts, such as display dishes, grid trays, etc.
3 wash with lukewarm water (max 30°C)
4 disinfect using an anti bacterial detergent
carefully clean the bott om tray, the drip, and the grid that protects the water drain, eliminat-
5
ing all foreign bodies that have fallen through the sucti on grid lift ing the plate of the fans
6 carefully dry using a soft cloth
i
Should you noti ce ice built up, call a specialized technician.
23.5 Clean specifi c materials
Material
Glass • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of
water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
• use a cloth soaked in neutral deter-
Plasti c
gent
(door seal
• clean with a cloth soaked in clean
profi les)
water
Aluminium • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of water
or detergent using a dry cloth in order
to prevent marks from forming
46
Remedy
Acti on
What to avoid
DO NOT use hot water on cold glass surfaces;
the glass could crack and injure the operator
DO NOT use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
DO NOT use dirty cloths
DO NOT use waxes, concentrated detergents,
which contain oil, bleach, glass cleaners, abra-
sive detergents or fl ammable fl uids.
DO NOT use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
DO NOT use rough or abrasive materials or
metal scrapers that scratch the aluminium
surfaces
DO NOT use steam cleaning equipment
DO NOT use dirty cloths
05060215 00 05-2022