Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Fastening the Panel
Wall installation
1 Pull shower panel slightly forwards at the bottom,
swivel clamping bracket into position.
2 Grip behind the panel, swivel fastening piece into
horizontal position.
3 Tighten fastening piece nut (SW10).
26
Corner installation
1 Use wing nut to adjust distance between clamping
bracket and wall to approx. 10 mm.
2 Swivel clamping bracket 90°, tighten wing nut.
Publicité
Table des Matières
