PHARO Duschpaneel Prestige Sensotronic 2613 Serie Instructions De Montage page 29

Shower
The system is in „sleep"
mode (OFF), display and
buttons don't have any
background lighting.
Pressing any button returns
the system to „stand by"
mode (ready for use). The
buttons and the display now
have background lighting,
display shows the current
temperature of water.
The controlis ready for
operation.
One or two differrent shower
types can now be activated.
The active buttons have
bright back-ground lighting.
Buttons with light
background lighting are not
activated, dark buttons can
not be selected.
Pressing an active button
resets this button and diffe-
rent shower type can be
selected
Examples of shower type
combination
1
overhead and body
shower
2
hand and body
shower
3
overhead and hand
shower
Setting the temperature
Use the thermostat to set the
temperature. If the red button
points upwards, the current
temperature of water is exact
38° C.
warmer: keep the red
button pressed and turn the
thermostat to the left (against
the clock)
cooler: turn the thermostat
to the right (with the clock)
The current temperature is
shown at the display.
Comfort electronics IV lite
29