Outdoorchef Davos Serie Mode D'emploi page 53

EXPLANATION OF THE SYMBOLS ON THE OPERATING CONSOLE
OF THE BLAZING ZONE
Heat settings/heat levels and Ignition
The burner achieves its highest power at the setting
INSTRUCTIONS FOR LIGHTING THE BLAZING ZONE
1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are firmly tightened (as described
in the LEAK TEST section).
2. Open the gas supply at the gas bottle.
3. Press the gas regulating knob for the side cooking plate and turn it anticlockwise to setting
down until the gas is burning.
4. If the gas does not ignite within 5 seconds, set the gas regulating knob to
Then repeat step 4.
5. If it is not possible to light the burner for the side cooking plate after 3 attempts, look for the causes (as described in the
TROUBLESHOOTING section).
KIT PLUS
®
and its lowest power at the setting
OUTDOORCHEF.COM
.
KIT PLUS
®
. Wait 2 minutes to allow the uncombusted gas to dissipate.
53
: Off position
: Low power
: Medium power
: High power
: Ignition
. Hold the gas regulating knob