Outdoorchef Davos Serie Mode D'emploi page 41

INSTRUCTIONS FOR LIGHTING
KETTLE
1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are firmly tightened (as described in
the LEAK TEST section).
2. Open the barbecue lid. CAUTION: Never ignite the barbecue when the lid is closed.
3. Open the gas supply at the gas bottle.
4. Press the gas regulating knob of the selected ring burner and turn it anticlockwise to the setting
down until the gas is burning.
5. If the gas does not ignite within 5 seconds, set the gas regulating knob to
Then repeat step 4.
6. If it is not possible to light the barbecue after 3 attempts, look for the causes (as described in the TROUBLESHOOTING section).
GAS SAFETY SYSTEM (GSS) - APPLIES ONLY FOR DAVOS 570 G PRO
The DAVOS 570 G PRO incorporates the innovative GAS SAFETY SYSTEM (GSS) which includes the following features:
FLAME GUARD
The FLAME GUARD is a closed system consisting of ignition and flame. This system ignites after opening the gas tap and activating
the ignition. The FLAME GUARD protects the flame from weather influences such as strong wind and ensures the burners always reignite
automatically if they happen to be extinguished*. The ignited burners therefore operate reliably in a wide range of weather conditions
(e.g. wind).
Benefits:
•
The ignited burners are optimally protected from weather influences.
•
Barbecuing at very low temperatures from 80 degrees, even in windy weather.
•
Prevention of escaping non-ignited gas.
* IMPORTANT: There is no such thing as 100% certainty that burners will not be extinguished by extreme weather influences. When working
with gas, you must always make sure that the barbecue is never left unattended. All tests are conducted under laboratory conditions.
. Wait 2 minutes to allow the uncombusted gas to dissipate.
41
OUTDOORCHEF.COM
. Hold the gas regulating knob