Led Light Ring; Default Settings; Contenu De La Boîte - Shure MXA310 Mode D'emploi

LED Light Ring

You can adjust LED light ring settings using Shure Designer software or the device's web application.
In Designer, go to Settings > Lights.
In the web application, go to Configuration > Light Ring.

Default Settings

Microphone Status
Active
Mute
Hardware identification
Firmware update in progress
Reset
Error
Device power-up
Contenu de la boîte
Cable-exit plug (black)
Cable-exit plug (white)
Cable-exit plug (silver)
Mounting tube wing nut
Mounting tube
Rubber Isolation Ring
Nylon cable ties (4)
LED Behavior / Color
Green (solid)
Red (solid)
Green (flashing)
Device identify: Entire light ring
Channel identify: Light ring segment
Green (ring fills up, turns off, repeats)
Network reset: Red (rotates around ring)
Factory reset: Blue (rotates around ring)
Red (split, alternate flashing). See the device event log for
details.
Blue (rotates around ring)
65A29429
65B29429
65C29429
65A27351
31A2165
66A405
80A583
Shure Incorporated
12/54