IMPORTANT: the belts should be loose enough
for your finger to fit between the belt and the
child's chest.
IMPORTANT: hold the safety belts under the
shoulder pads and pull, as shown in the picture.
IMPORTANT: the booster cushion must be
removed when the Viaggio 0+1 Switchable is used
as a Group 1 car seat.
How to adjust the height of the head
rest
When you have finished, try moving the headrest
to check it is properly attached.
WARNING:
WARNING:
Group 0+ mode:
IMPORTANT: the safety belts should not be too
far above or below the child's shoulders.
WARNING: do not use the child seat as Group 1
with the casing extracted.
Group 1 mode:
IMPORTANT: the safety belts should not be too
far above or below the child's shoulders.
IMPORTANT:
How to remove the lining