Peg-Perego VIAGGIO 0+ 1 Notice D'emploi page 25

IMPORTANT
• "Viaggio 0+1 Switchable" must be rear-facing when
used as a Group 0+ car seat and must be forward-
facing if used as a Group 1 car seat.
• Do not install "Viaggio 0+1 Switchable" in seats
that are not in the direction of travel or are
transversal with respect to the direction of travel.
• If used as a Group 0+ car seat on the front seat, the
front airbag must be deactivated.
• If the child seat is installed on the front seat in
Group 1 configuration, it is advisable to place it as
far as possible from the dashboard.
• This item has a progressive serial number.
• If you experience problems during the installation
of Viaggio 0+1 Switchable, lift or remove the
headrest.
WARNING
Carefully read the instructions before use and keep
them in a safe place for future reference. Failure
to thoroughly follow the instructions for the
installation of the car seat could expose your child
to serious hazards.