Unit Description; Specifications - Shindaiwa EC7500 Manuel D'utilisation

Unit Description

Air Cleaner
Cover
Carburetor Idle
Adjustment Screw
Choke
Primer Pump
Clutch Cover
Rear
Handle
Figure 5
Specifications
Engine type................................................................................
Displacement ...........................................................................
Bore x stroke ...........................................................................
Maximum power output** ..................................................... .....................................................
Type of fuel ...............................................................................
Fuel tank capacity ....................................................................
Carburetor type ........................................................................
Ignition system ........................................................................
Spark plug.................................................................................
Engine starting/stopping........................................................
Power transmission..................................................................
Anti-vibration system................................................................
Safety devices............................................................................
Recommended engine idling speed........................................
Recommended maximum engine idling speed......................
Rated spindle speed†...............................................................
Maximum spindle speed†.......................................................
Maximum peripheral wheel speed†.......................................................
Speed reduction ratione...........................................................
Dry weight (without wheel)....................................................
Dimensions (L x l x H)............................................................
Sound pressure level†..............................................................
Sound power level††................................................................
Vibration level§
Front handle (idle/rated spindle)........................................
Rear handle (idle/rated spindle).............................................
Maximum cutting depth
Abrasive Wheel................................................................
Diamond wheel................................................................
Recommended cut-off wheels
abrasive............................................................................
diamond............................................................................
Arbor sizes..................................................................................
* Measured in accordance with EN ISO 11201: 1995.
** Measured in accordance with ISO 7293: 1983.
† Measured with 305mm wheel (EC7500) and 355mm wheel (EC7600).
6
Muffler
EC7500.18
Wheel Guard
Lock Knob
Decompression
Valve
Belt Guard
Cut-off Wheel
Cylinder
Cover
2-cycle, vertical cylinder, air-cooled
73.5 cm
51 x 36 mm
3.3 kW
Unleaded gasoline plus 2-cycle engine oil (50: 1)
800 ml
Diaphragm
Electronic
NGK BPMR7A
Toggle switch/recoil starter
Automatic centrifugal clutch, V-ribbed belt
Unified handles with 7-point support
Throttle lock-out, wheel guard
2,500 min
10,450 min
EC7500
-1
3,800 min (RPM)
4,180 min -1 (RPM)
67 m/s
2.50 : 1
10.0 kg
740 x 220 x 375 mm
97 dB (A)
108 dB (A)
6.96/5.48 m/s 2
2
8.61/14.60 m/s
305 mm - 102 mm
320 mm - 109 mm
305 mm
320 mm
20 mm, 22 mm and 25.4 mm
†† Measured in accordance with EN ISO 3744: 1995.
§ Measured in accordance with EN 28662-1: 1992.
Front
Handle
Recoil Starter
EC7500.1A
Fuel Filler
Cap
3 *
-1 (RPM)**
-1 (RPM)**
EC7600
-1
3,320 min (RPM)
3,650 min -1 (RPM)
68 m/s
2.87 : 1
10.5 kg
765 x 220 x 390 mm
97 dB (A)
110 dB (A)
10.09/10.49 m/s 2
2
8.93/13.70 m/s
355 mm - 127 mm
360 mm - 129 mm
355 mm
360 mm
Throttle
Trigger
Lockout
Throttle
Trigger
ON/OFF
Switch