Safety Labels - Shindaiwa EC7500 Manuel D'utilisation

Safety Precautions (continued)
■
The unit must be held firmly with both
hands, one hand on the rear handle,
the other on the front handle. Never
hold onto any other part of the unit.
■
When cutting vertically, the unit
should be positioned horizontally
or with the wheel side tilted slightly
down. When cutting horizontally, the
recoil starter-side should face up.
■
Never impact or apply pressure to
the sides of the cut-off wheel for any
reason.
■
Maintain firm and stable footing
during operation. Do not overreach.

Safety Labels

DECOMPRESSION
VALVE
PRIMER
IMPORTANT!
Make sure all safety and operation
information labels are undamaged
and readable. Immediately replace
damaged or missing safety and
operation information labels, which
are available from your authorized
Shindaiwa dealer.
Figure 4
WARNING!
Operation
■
When working in a group, make sure
operators are least 10 meters away
from each other.
■
If you drop the unit or strike it against
a hard surface, stop the engine
immediately and inspect for damage.
If you discover damage, have it
repaired before you return the unit to
service.
■
Check the fuel filler cap regularly
during operation to make sure it
remains securely tightened.
■
If you discover fuel leakage,
immediately stop the engine.
Wheel Guard
Lock Knob
Free Lock
EC7500.18
BEL T
DIRECTION
GASOLINE : OIL
50 : 1
■
Cutting may cause sparks from the
cut-off wheel. Make sure there is no
flammable substances nearby.
■
Never cut live electrical wires. The
shock you might receive could be
very serious.Do not touch hot parts
such as the muffler or cylinder. You
could burn yourself severely.
■
The cut-off wheel gets hot while cutting.
Never touch the wheel immediately after
cutting. You could burn yourself severely.
■
While the engine is running, never touch
high voltage parts such as the spark
plug cap and plug cord.
EC7500
EC7600
Rated spindle speed Rated spindle speed
-1
4180 min
3320 min
Max spindle
speed
3800 min-1
EC7500 EC7600
-1
Max spindle
speed
3650 min-1
STOP
EC7500.1
No Fire
Allowed
5