Troubleshooting Guide - Shindaiwa EC7500 Manuel D'utilisation

Troubleshooting Guide

Engine does not start
Cutting performance is poor
If the above inspections and maintenance procedures do not correct the problem,
18
PROBLEM
Make sure the fuel tank contains fresh, clean fuel.
Remove the spark plug.
PROBLEM
Make sure the choke is pushed in fully.
Make sure air cleaner element is clean.
Make sure the cut-off wheel is appropriate to your work.
Make sure the diamond wheel is sharp.
Make sure carburetor is properly adjusted.
Make sure the drive belt is properly tightened.
contact your Shindaiwa dealer for assistance.
Is spark plug wet?
Is spark plug dry?
Dry the spark plug. Pull the recoil
starter several times to remove fuel
from the cylinder. Restart.
Replace fuel filter.