Massage Modes - Human Touch NOVO Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

take
control
USING
MANUAL
From the main menu, select MANUAL to display the Manual Programs menu. From this menu
you can customize your back massage mode, focus, width and speed.
OPTION
MODE
Kneads your back in a small, circular motion on both sides of your spine
Kneading
simultaneously.
Tap Touch
A pulsing and rolling massage.
Mode
Alternates rapid-tapping strokes along the spine to stimulate both spinal muscles
Percussion
and spinal joint areas, emulating the percussive massage technique used in
sports medicine for deep muscle therapy.
Shiatsu
Rolls gently up and down your back near your spine.
Combines circular kneading motion with rapid-tapping percussion strokes.
Knead + Perc
Audio Sync
When connected to a smartphone or tablet, synchronizes the massage to your music.
Full
Massages your full back.
Focuses your massage in a limited zone. Use the Position buttons to position the
Zone
massage zone where you want it. Choose from Short (3"), Medium (6"), or Long (9")
Focus
zone range.
Massages your back in a single spot. Use the position buttons to position the
Spot
massage exactly where you need it.
Adjusts the horizontal massage range during Tap Touch, Percussion, or
Width
Shiatsu massage modes. Options are: wide (default), medium, narrow.
Knd Speed
In manual mode, adjusts the kneading and tap touch massage speed.
NOTE: All manual massages include foot/calf massage and Cloud Touch air massage.
humantouch.com

MASSAGE MODES

DESCRIPTION
10
CONFIGURING CLOUD TOUCH, HEAT, AND OTHER SETTINGS
Setting Cloud Touch massage focus and intensity
The Cloud Touch massage uses air to massage you from head to toe. You can
select one or more Cloud Touch massage areas and set the intensity at any time
during an auto massage program. You can also enjoy a Cloud Touch massage
independent of any auto program.
1. From the main menu, select CLOUD TCH to display the Cloud Touch menu.
2. Select FOCUS, then select the area(s) you wish to activate. You must select a
massage focus before selecting the intensity.
3. Select INTENSITY, then select the desired air intensity, or select OFF
to stop the Cloud Touch massage.
TIP: During any massage, press the left/right buttons on the remote control to adjust the Cloud Touch intensity.
Using backrest heat
The default backrest heat setting is Off. To turn on the heat:
1. From the main menu select HEAT to display the Heat screen.
2. Select ON
Configuring massage duration
You can set your massage duration to 10 (default), 20, or 30 minutes.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select TIME, then select the desired massage duration.
Selecting a language
You can choose to display all interface text in either English (default),
Mandarin Chinese, Korean, or Vietnamese.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select LANGUAGE, then select the desired language.
If you select a non-English language that you do not understand, follow these steps
to return the display to English:
1. Power the chair off, and then on.
2. Select the last option on the screen to display the Settings screen.
3. Select the second option on the screen to display the four languages on the right-hand
side of the screen.
4. Select EN to restore the display to English.
11

Publicité

Table des Matières
loading

Table des Matières