Human Touch NOVO Mode D'emploi Et D'entretien page 5

take a seat
Power on
1. Plug the power cord into a grounded 120-volt outlet.
2. Turn the power switch on the right-hand side of the
chair to On.
3. Make sure the remote control is secured in the
remote control pocket, then take a seat.
Adjust the recline angle
Press the STOP/POWER/RESTORE button on the remote control,
then use the BACK buttons to recline the chair to the desired angle.
humantouch.com
Power cord
6
Now take a seat and get comfortable!
experience a truly amazing massage.
Adjust the footrest angle
Use the LEGS buttons to adjust the footrest angle so that your feet are on the
bottom and your calves are pressing on the back of the calf massage wells.
If your calves are not pressing against the rear calf massage well, use the
LEGS EXTEND/LEGS RETRACT buttons to extend the calf massager until
they are in that position.
WARNING: Do not sit or stand on the calf massager, to avoid injury or permanent damage to your chair.
7
You're about to