Human Touch NOVO Mode D'emploi Et D'entretien page 8

Connecting a device to the speaker system
Your massage chair contains a built-in high-quality speaker system, to which you
can connect via BlueTooth. The default BlueTooth setting is On.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select BLUETOOTH, then verify that it is set to On. The massage chair is now
discoverable by your device.
3. Using your device, scan for BlueTooth devices and select HT-NOVO to connect.
See your device instructions for more information.
4. Enjoy your favorite music along with your favorite massage!
Configuring remote sound
You can choose whether or not to hear a beep when you push remote control buttons.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select BEEP, then select On (default) or Off.
Configuring and disabling the Stretch feature
You can set the stretch direction to stretch your legs either outward or down.
You can also turn off the stretch feature. When stretch is turned off, the
Energize programs do not include the stretch feature. When the chair is
powered off and on again, this stretch setting resets to On.
1. From the main menu select SETTINGS to display the Settings menu.
2. Select STRETCH, then select the desired setting.
Disabling the Rocking feature
If you prefer your massage without rocking, you can turn the Rocking feature
off. When Rocking is turned off, the Performance programs do not include
the rocking feature. When the chair is powered off and on again, the Rocking
setting resets to On.
Setting the calf massager roller speed
You can set the calf massage roller speed to slow, medium, or fast. You can also
turn the calf massage roller off.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select CALF SPD, then select the desired speed.
humantouch.com
12
care and maintenance
To keep your product working and looking its best, please follow these simple care guidelines.
WARNING:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. When cleaning the controller or power switch, use a dry cloth only. Never use a damp cloth to clean the controller
or power switch.
3. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does
not fade prior to using the solution on the entire product surface.
4. Do not use benzene, thinner or any other solvents on your product.
Cleaning Code Standard: W
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean with an
upholstery shampoo or a mild detergent foam. To clean the foot/calf massage well inserts, remove the inserts from the chair,
hand-wash with a mild detergent, then line dry.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication
or servicing is required.
2. Your chair should only be serviced by an authorized service center.
Use and Storage Environment:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that
the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame.
3. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
4. Do not use or store in extreme temperatures; product stored in cold temperatures may require 48 hours at room
temperature to function properly.
5. Product should be used and stored in an environment with non-condensing humidity ranging from 10 to 80%;
excessive humidity will damage the mechanics.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
Specifications* Operating Voltage:
Power Consumption:
Chair Size (Upright):
Chair Size (reclined):
Required Recline Clearance:
Product Weight:
Maximum Load Weight:
*Specifications are subject to change without prior notice.
AC110-120V 60 Hz
240 Watts
63"L x 31"W x 43"H
71"L x 31"W x 38"H
9"
273 Lbs.
285 Lbs.
13