Massage Modes - Human Touch Novo XT2 Mode D'emploi Et D'entretien

take control
USING MANUAL
From the main menu, select MANUAL to display the Manual Programs menu.
From this menu you can customize your back massage mode, focus, width
and speed.
If you have not already selected a shoulder height from the Manual Programs
menu during this massage session, the Set Shoulder Height screen displays. Set
the shoulder height to the desired position, ranging from small (1) to large (9).
Your massage will automatically be mapped to the selected shoulder height, for
maximum effectiveness.
IMPORTANT: After selecting your shoulder height, you cannot select any
additional manual settings until the status screen displays with the selected
massage mode listed at the top, indicating that the program is now adjusted to
your selected setting.
OPTION MODE
Kneads your back in a small, circular motion on both sides of your spine
Kneading
simultaneously.
Tap Touch A pulsing and rolling massage.
Alternates rapid-tapping strokes along the spine to stimulate both spinal muscles
Percussion
and spinal joint areas, emulating the percussive massage technique used in
Mode
sports medicine for deep muscle therapy.
Shiatsu
Rolls gently up and down your back near your spine.
Combines circular kneading motion with rapid-tapping percussion strokes.
Knead + Perc
Audio Sync
When connected to a smartphone or tablet, synchronizes the massage to your music.
Full Massages your full back.
Focuses your massage in a limited zone. Use the Position buttons to position the
Zone
massage zone where you want it. Choose from Short (3"), Medium (6"), or Long (9")
Focus
zone range.
Massages your back in a single spot. Use the position buttons to position the
Spot
massage exactly where you need it.
Adjusts the horizontal massage range during Tap Touch, Percussion, or Shiatsu
massage modes. Options are: wide (default), medium, narrow. TIP: Use the navigation
Width
buttons on the main screen to configure the settings in the upper left-hand corner.
In manual mode, adjusts the kneading and tap touch massage speed. TIP: Use the
Speed
navigation buttons on the main screen to configure the settings in the upper left-
hand corner.
NOTE: All manual massages include foot/calf massage and Cloud Touch air massage.
humantouch.com

MASSAGE MODES

DESCRIPTION
10
USING THE DEEP TISSUE PROGRAMS
Deep Tissue programs
Select from the following Deep Tissue programs:
• Deep Stretch: Intense back stretch for deep muscle penetration.
• Deep Breath: Sync your breath with the rhythmic movement of the chair
and relax into deep meditation.
• Deep Soothe: Relax with acupressure for a deep and soothing massage.
Customize your Deep Tissue massage Focus by selecting from the following
settings:
• Full: Massages your full back.
• Zone: Focuses your massage in a limited zone. Use the Position buttons
to position the massage zone where you want it. Choose from Short (3"),
Medium (6"), or Long (9") zone range.
• Spot: Massages your back in a single spot. Use the position buttons to
position the massage exactly where you need it.
CONFIGURING CLOUD TOUCH, HEAT, AND OTHER SETTINGS
Setting Cloud Touch massage focus and intensity
The Cloud Touch massage uses air to massage you from head to toe. You can
select one or more Cloud Touch massage areas and set the intensity at any time
during an auto massage program. You can also enjoy a Cloud Touch massage
independent of any auto program.
1. From the main menu, select CLOUD TCH to display the Cloud Touch menu.
2. Select FOCUS, then select the area(s) you wish to activate. You must select a
massage focus before selecting the intensity.
3. Select INTENSITY, then select the desired air intensity, or select OFF
to stop the Cloud Touch massage.
TIP: During any massage, press the CLOUD button on the remote control to adjust the Cloud Touch intensity.
The selected intensity displays next to CLOUD TCH in the upper left corner of the main screen.
Using backrest heat
The default backrest heat setting is Off. To turn on the heat,
press the HEAT button on the remote or select HEAT from the
main menu then select ON.
11