Package Contents; Important - Axis Communications M10 Serie Guide D'installation

AXIS M10 Series
AXIS M10 Series Installation Guide
This guide helps you to install the AXIS M10 Series Network Camera on
your network. For further information, please see the User's Manual
available on the CD, or from www.axis.com/techsup
Installation steps
1. Check the package contents against the list below.
2. Hardware overview on page 4.
3. Install the hardware on page 8.
4. Assign an IP address on page 10.
5. Set the password on page 13.
6. Configure the wireless
connection on page 15.
(AXIS M1011-W/M1031-W only)

Package contents

Item
Network Camera
Indoor power
adaptor
(country specific)
Extension tube
Flexible clamp
CD
Printed Materials
Models/variants/notes
AXIS M1011, AXIS M1011-W, AXIS M1031-W,
AXIS M1054
PS-H* or PS-V
Europe, UK, USA/Japan, Australia, Korea, Argentina, China
*power adaptor extension cable 1.8m (5.9ft), PS-H only
• Attached short extension tube, 4 mounting screws/plugs
• 1 long extension tube, 1 cable clip, 1 tube joint (AXIS
M1054 only)
For shelf mounting
AXIS Network Video Product CD, including product
documentation, installation tools and other software
AXIS M10 Series Installation Guide (this document)
Axis Warranty Document

Important!

This product must be used in
compliance with local laws
and regulations.
Page 3