Axis Communications M10 Serie Guide D'installation page 14

Page 14
3. Enter a password and then re-enter it to confirm the spelling. Click
OK. The password has now been configured.
To configure the
password directly via an unencrypted
connection, enter the password here.
4. To log in, enter the user name "root" in the dialog as requested
Note: The default administrator user name"root" cannot be deleted.
5. Enter the password as set above, and click OK.
If required, click Yes to install AMC (AXIS Media Control), which allows
viewing of the video stream in Internet Explorer. You will need
administrator rights on the computer to do this. If required, click the link
to install missing decoders. The Live View page of the AXIS M10 Series
network camera appears. The Setup link to the right gives you menu
options that allow you to customize the camera.
AXIS M1011/ AXIS M1054: The installation is now complete.
AXIS M1011-W/M1031-W: Proceed to Configure the wireless
connection, on page 15.
To create an HTTPS connection, start
by clicking this button.
AXIS M10 Series