Installation Steps; Package Contents - Axis Communications 211M Guide D'installation

AXIS 211M Installation Guide
This installation guide provides instructions for installing the AXIS 211M Network Camera
on your network. For all other aspects of using the product, please see the User's Manual,
available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.
6. Adjust the focus. See page 10.

Package contents

Item
Network camera
PS-K indoor power supply
(country specific)
Terminal block connector
Camera stand
CD
Printed Materials
All manuals and user guides at all-guides.com
AXIS 211M
Installation Guide
Models/variants/notes
AXIS 211M
Europe
UK
Australia
USA/Japan
Argentina
Korea
4-pin connector block for connecting external devices to the I/O terminal
connector
Supplied with mounting screws
AXIS Network Video Product CD, including product documentation, installa-
tion tools and other software
AXIS 211M Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws
and regulations.
Page 3