Installation Steps; Package Contents - Axis Communications 211W Guide D'installation

AXIS 211W Installation Guide
This installation guide provides instructions for installing the AXIS 211W Network Camera
on your network. For all other aspects of using the product, please see the User's Manual,
available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Set an IP address. See page 6.
5. Set the password. See page 9.
6. Configure the wireless connection. See page 10.
7. Adjust the focus. See page 14.

Package contents

Item
Network camera
PS-K indoor power supply
(country specific)
Terminal block connector
Camera stand
CD
Printed Materials
AXIS 211W
Installation Guide
Models/variants/notes
AXIS 211W with antenna
Europe
UK
Australia
USA/Japan
Argentina
Korea
4-pin connector block for connecting external devices to the I/O terminal
connector
Supplied with mounting screws
AXIS Network Video Product CD, including product documentation, installa-
tion tools and other software
AXIS 211W Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws
and regulations.
Page 3