Operating Instructions - Kapro Prolaser 891 Manuel De L'utilisateur

Operating Instructions

Laser Square
1. Remove the battery cover
2. Insert 2 AA alkaline batteries, according to the polarity marked inside
the battery compartment
3. Snap the battery cover back into place
4. Set up the Laser Square on a flat, vibration-free surface
5. Press the On/Off button to turn on the laser lines
6. Press the On/Off button to turn off the laser lines
Laser Target
The Prolaser 891 Laser Square is effective at up to 100ft (30m) when
®
used together with the Laser Target.
Use the Laser Target over distances of more than 33ft (10m) and in
bright light conditions.
6