Operating Instructions - Kapro Prolaser Plus 872 GREEN Manuel D'utilisation

Working in Automatic mode (self-leveling):
In automatic mode the laser level will level itself in the range
of ± 3° and will project horizontally or vertically or both lines
simultaneously.
1. Remove the laser from the case and place it on a solid
flat
Vibration free surface or on a tripod.
2. Turn the locking switch #1 clockwise to the ON position
the laser level will generate the crossed horizontal and
vertical lines and the green LED near the V/H push
button will light up.
3. Choose the beams that you want to work with by pushing
the Beam push button V/H
4. Use the adjustable metal legs #2 to adjust the height of
the horizontal line.
5. If the initial slope of the laser is beyond ± 3° and the
automatic mode is activated the laser lines will
beeping alarm will be heard. In this case reposition the
laser on a more leveled surface.
6. Before moving the laser level switch the locking switch #1
to the OFF position, this will lock the pendulum and protect
your laser.
10

OPERATING INSTRUCTIONS

flash
and a