Operating Instructions - Kapro Prolaser Plus 870 Green Manuel D'utilisation

OPERATING INSTRUCTIONS

Working in Automatic mode (self-leveling):
In automatic mode the laser level will level itself at a ± 3°
range and will project horizontal or vertical beams or both
beams simultaneously.
vibration free surface or on a tripod.
2.Slide the locking switch #1 to the ON position - the laser
level will generate the crossed horizontal and vertical
beams and the green LED near the V/H button will light up.
3.Choose the beams that you want to work with by pushing
the Beam button V/H
4. If the initial slope of the laser is beyond ± 3° and the
a beeping alarm will be heard. In this case
reposition the laser on a more leveled surface.
5.Before moving the laser level slide the locking switch #1 to
the OFF position, this will lock the pendulum and protect
your laser.
10