Pizza Function - Breville BOV860 Serie Manuel D'instructions

screen indicates the preset temperature of
'500°F', while the bottom figure indicates the
preset time of ':10 MINS'.
SUPER
5. The broiling power level and time can be
adjusted before or during the broiling cycle.
a) The broiling power level is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to adjust
broiling to one of three power levels: 'HI',
'MED' and 'LO' .
b) The broiling time is displayed as the
bottom figure on the LCD screen. Turn
the TIME dial to adjust the time up
to 20 minutes.
6. Press the START/CANCEL button to
activate the BROIL function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange.
7. The timer will be displayed and
automatically begin to count down. The
power level and time can be adjusted
during the broiling cycle by turning the
corresponding TEMPERATURE and TIME
dial. The cycle can be stopped at any time by
pressing the START/CANCEL button.
8. At the end of the broiling cycle, the oven
alert will sound. The START/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.

PIZZA FUNCTION

The PIZZA function melts and browns cheese
and toppings, while crisping up the pizza crust.
1. Insert the wire rack, with the spokes facing
upward, into the middle rack height position.
CONVECTION
2. Close the oven door.
3. Turn the FUNCTION dial until the indicator
on the LCD screen reaches the PIZZA
function. The top figure on the LCD screen
indicates the preset PIZZA temperature of
425°F, while the bottom figure indicates the
pizza size of 10''. The preset CONVECTION
and FROZEN settings will also be displayed.
SUPER
4. The pizza temperature, time, convection,
and frozen settings can be adjusted before
or during the cycle.
a) The pizza temperature is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to
adjust the temperature from 120°F to a
maximum of 450°F.
b) The pizza size is displayed as the bottom
figure on the LCD screen. Turn the TIME
dial to the left to reduce the size, or to the
right to increase it. The pizza sizes range
from 6" to 13".
5. Press the START/CANCEL button to
activate the PIZZA function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking 'PREHEATING'.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. Place pizza, positioned on the included
pizza pan if using, on the center of the wire
rack so air will flow around all sides of the
pizza. Close the oven door.
8. After the PREHEATING alert has sounded,
START/CANCEL
CONVECTION
15