Putting Into Storage - Gardena 9000 aquasensor Mode D'emploi

1783-20.960.06_18.08.2011_GARDENA.qxp 06.09.2011 12:03 Seite 15
Manual operation :
5
Only for the
submersible pumps :
Flat suction /
Normal operation
8

5. Putting into Storage

Frost-free storage :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
The pump remains in operation continuously. The ON
3
sensor is locked in manual position and bridged via the
7
contact .
6
1. Push OFF sensor
3
sensor right down so that the
3
ON sensor touches the
7
contact .
2. Stand the pump on a firm surface
– or –
use a rope attached through
the bore hole in the carrying
5
handle to immerse the
pump in a well or shaft.
3
3. Plug the power cable
4
Flat suction :
v Turn the 3 swivel feet
180° to 1 mm.
The residual water level of approx. 1 mm is only reached during
flat suction in the manual operation mode.
v Store the pump away from frost before the first frost sets in.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
4 3
and ON
7
6
into a mains socket.
Normal operation :
8
v Turn the 3 swivel feet
180° to 5 mm.
4
8
15