Belkin N1 VISION Mode D'emploi page 51

Using the Web-Based
Advanced User Interface
Changing the Wireless Network Name (SSID) – To identify your wireless
network, a name called the SSID is used. The SSID is your network name.
The default network name of the N1 Vision is "Belkin N1 Wireless" followed
by six digits that are unique to your N1 Vision. Your network name will
look something like "Belkin_N1_Wireless_123456". You can change this to
anything you choose, or you can leave it unchanged. Keep in mind, if you
decide to change your wireless network name, and there are other wireless
networks operating in your area, your network name needs to be different
from other wireless networks that may be operating in your area. To change
the SSID, type in the SSID that you want to use in the SSID field (1) and click
"Apply Changes" (2). The change is immediate. If you make a change to the
SSID, your wireless-equipped computers may also need to be reconfigured
to connect to your new network name. Refer to the documentation of
your wireless network adapter for information on making this change.
Note: Please periodically check for new Router firmware updates from the
"Utilities > Firmware update" page. Newer firmware can fix problems, add
wireless features, and/or improve wireless performance (see page 75).
(1)
(2)
49
1
2
3
4
5
6
7
8
9
10