Alternate Setup Method - Belkin N1 VISION Mode D'emploi

Alternate Setup Method

Step 1 Hardware Connections
Follow the Quick Installation Guide (QIG)
See the QIG or Step 1: Hardware Connections from the previous section.
Step 2 Set your Computer's Network Settings
to Work with a DHCP Server
See the section in this User Manual called "Manually Configuring Network
Settings" for directions.
Step 3 Configuring the N1 Vision Using the
Web-Based Advanced User Interface
Using your Internet browser, you can access the N1 Vision's Web-Based
Advanced User Interface. In your browser, type "192.168.2.1" (do not type in
anything else such as "http://" or "www"). Then press the "Enter" key.
30