Control Unit And Foot Control - NSK Surgic Pro Mode D'emploi

3. Control Unit and Foot Control

(1) Light Key
(2) Coolant Key
(3) FWD/REV Key
(4) GEAR Key
(5) MEMORY Key
(6) CAL Key
3-1 Keys on the Control Unit
Light Key
Coolant Key
Use to set gear ratio of the attached handpiece before use. Repeat press this Key until the LCD display indicates the
correct gear ratio of the handpiece.
MEMORY Key
CAL Key
all program numbers sequentially by pressing Keys.
+
10
on the control unit memory.
Calibration Load
Irrigation Pump
(7) SPEED Key
(8) TORQUE Key
(9) PROGRAM Key
Motor Cord
(10) USB REC
Connector Socket
Coolant Solution
Hanger Post Holder
Main Power Switch
AC Power Cord
Connector socket
Fuse Holder
The item which does not have number is explained in context.
*
5
USB flash drive Socket
Foot Control Cord
Connector Socket