Retevis RT56 Manuel D'instructions page 13

Means Main/Auxiliary
Frequency both in
frequency mode
Channel Save and Delete
•Channel Save
In frequency mode, choose required frequency and other setting such as CTCSS/DCS/offset
etc. in main frequency. After setting, press [MENU] key, choose Menu No.34 "MEM-CH" then
press [MENU] key again, screen shows channel number to be saved at the bottom., choose
channel number by [ ]_ [ ] key, or directly key in number. If there is "CH-" i con on the left,
means current channel has saved content. Press [MENU] to save and quit, then saved channel
can be checked, or press [EXIT] key to quit directly, as shown:
dle channel, can be saved
Single Channel Delete
In standby mode, press [MENU] key, choose Menu No.35 "DEL-CH" then [MENU] key again,
screen shows channel number to be deleted at the bottom, choose channel number by [
[ ] key, or directly key in number. If there is CH- icon on the left, it means current channel is
saved channel which can be deleted, if there is no CH- icon on the left, means current channel
is idle channel, cannot be deleted. Press [MENU] to onfirm delete, or press [EXIT] key to quit
directly, as shown:
This channel is saved channel,
can be delete
Reset Mode
•Power off, meanwhile press [PTT] and numeric key [1] then power on, enter "VFO" reset
mode, hold on for 2 seconds and release, VFO frequency and function content be deleted.
•Power off, meanwhile press [PTT] and numeric key [2] then power on, enter "Full" reset mode,
Means Main/Auxiliary
Frequency both in
channel mode
※Note:In channel and frequency channel modes, we can have
user-defined name by Menu No.33 "CHNAME", i t is shown as below：
Means Main/Auxiliary
Frequency in
frequency channel
mode
With content in channel, can not be saved
This channel is idle channel,
cannot be delete
12
Means Auxiliary
Frequency in
frequency channel
mode, Main
frequency in channel
mode
] _