Storing The Appliance - Kärcher HDS 3.0/20 C Ea Mode D'emploi

Recommended cleaning method
Loosen the dirt:
–
 Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
Remove the dirt:
–
 Spray off loosened dirt with the high
pressure jet.
Operating with cold water
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools,
etc.
 Set operating pressure according to
need.
The appliance works in the most economi-
cal temperature range (max. 140 °F/60 °C).
Operating with hot water/steam
We recommend the following cleaning tem-
peratures:
Light contaminations
–
86 °F/30 °C-122 °F/50 °C
Contaminations containing protein, i.e.
–
in the food processing industry
max. 140 °F/60 °C
Vehicle cleaning, machine cleaning
–
140 °F/60 °C-194 °F/90 °C
De-preserve, contaminations contain-
–
ing strong fat contents
212 °F/100 °C-230 °F/110 °C
De-frosting of surcharge substances,
–
partially facade cleaning
up to 284 °F/140 °C
Operating with hot water
Danger
Scalding danger!
 Set device switch to desired tempera-
ture.
Operating with steam
Danger
Scalding danger!
Therefore the following measures must
definitely be performed:
14
Eco level
 Replace high pressure nozzle (stain-
less steel) with steam nozzle (brass,
order see specification).
 Set the operating pressure on the pump
unit to the minimum value.
 Set device switch to min. 212 °F/
100 °C.
After operation with detergent
 Set dosing value for detergent to "0".
 Set the appliance switch to "1" (opera-
tion with cold water).
 Open the hand spray gun and rinse the
appliance for at least 1 minute.
Turn off the appliance
Danger
Danger of scalding by hot water. After the
operation with hot water or steam, the de-
vice must be operated with opened gun
with cold water for at least two minutes.
 Set the appliance switch to "0/OFF".
 Shut off water supply.
 Open the hand spray gun.
 Turn on pump shortly (appr. 5 seconds)
with device switch.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Activate hand spray gun until device is
pressure less.
 Lock the trigger gun.

Storing the Appliance

 Lock in the steel pipe into the holder of
the appliance hood.
 Roll up high pressure hose and electri-
cal conduit and hang them into the re-
spective holders.
Note: Do not twist high pressure hose and
electrical conduit.
– 7
EN