Reading The Data Stored On The Bid Chip / Bid Key; Charge / Discharge Processes With A Bid Chip / Key - Multiplex POWER PEAK TRIPLE 360W EQ-BID Notice D'utilisation

POWER PEAK® TRIPLE 360 W EQ-BID
data to be adopted. In both cases, the programming display is shown again.

8.3 READING THE DATA STORED ON THE BID CHIP / BID KEY

If you have a battery with a BID chip and once connected to the charger, the following
battery data can be read out to give you an accurate display of the battery state.
Data is stored on the BID chip / BID key, and can be read.
9.

CHARGE / DISCHARGE PROCESSES WITH A BID CHIP / KEY

BID chip / keys are so small that you can slip them into whatever other accessories you
are using. The pictures on the next page show how BID chips are used.
Operating instructions
Thereafter select "END" and confirm with "ENTER".
A security query will appear if data is changed
during entry. To save the data, you must change
the answer to 'YES' with the 'INC' or 'DEC' but-
ton, answer YES and then finally confirm by
pressing ENTER. Now the data is permanently
stored on the BID chip / BID key, and can be
read.
The double beep indicates that the change has
Pressing the 'INC' button twice displays the first
parameter on the screen. The charged capacity of
the last charging or discharging operation is shown.
Pressing the 'INC' button twice more displays the
second parameter on the screen. The maximum
capacity value of all charging or discharging opera-
tions is displayed.
Pressing the 'INC' button twice more displays the
final parameter: this is the number of charge cycles
and the programmed date.
18
42
# 30 8562