Setting Up The Parameters; Settings In Manual Mode - Multiplex POWER PEAK TRIPLE 360W EQ-BID Notice D'utilisation

POWER PEAK® TRIPLE 360 W EQ-BID
'ENTER'
button
'ENTER'
button
button

7.2 SETTING UP THE PARAMETERS:

There is a separate Setting menu with corresponding display for each charge or dischar-
7.3

SETTINGS IN MANUAL MODE

The following settings have to be entered manually before a charge or discharge process
can be started in manual mode; this ensures that the charger is able to work through the
process efficiently when in this mode:
Note: Only values in the first line can be changed with the flashing arrow symbol
being affected.
Operating instructions
button
button
ge parameter. The parameter to be changed is
corresponding line is indicated by an arrow on the
right-hand display margin. The set-up procedure
flash alternately on the right-hand screen margin. A
button. Press ENTER to confirm the new setting.
The illustrated display sequence shows a typical
example of how the charging current is changed.
button
12
36
# 30 8562
'ENTER'
button