Repeated Measure - Gima SP-10 Manuel De L'utilisateur

25
d. POWER OFF
Under [Menu] interface, select "Power off", the device will shut down.
Note: If there is no operation within 1 minute, the device will power off automatically.
e. EXIT
Under [Menu] interface, select "Exit" to return to [Main interface]. If the measurement is not completed before
enter [Main interface], it will return to [Testing] interface.

6.1.5 Repeated measure

Measurement of the device is repeatable. Long press "Repeated measure" key to enter [Testing] interface. When
the memory is full, it will display [Memory full] interface as shown in Fig.27. If you select "Yes", it will enter [Delete
data] interface; if you select "No", it will enter [Menu] interface.
Figure 27