Fancom MRK.2
2. ENGLISH
About this manual
This manual contains information about the mounting and installation
of an end station. Read this manual carefully and follow all safety
instructions.
If you have any questions, please do not hesitate to contact your Fancom
dealer. The subjects discussed in this manual are listed in the table of
contents.
The following symbols are used in this manual:
!
Suggestions, advice and notes with additional information.
Caution
The product could be damaged, if the procedures are not followed
carefully.
Caution
Life threatening situation, if the procedures are not followed
carefully.
2.1 Introduction
The MRK.2 is an end station specially developed for clockwise or
counter clockwise switching of a 1 or 3-phase motor in the agricultural
sector. It is controlled by a 0-10V/10-0V signal or an open-close control.
The MRK.2 has extensive manual operation possibilities.
2. ENGLISH / 2.1 Introduction
GB
1