Application Setup - OHAUS Defender 5000 TD52P Mode D'emploi

Indicateurs
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Defender 5000 Indicators
Press the Softkey corresponding to the icon
edit the PCS value using the alphanumerical
keypad.
After editing, press the Softkey corresponding to
the icon
for confirmation, and then press the
Softkey corresponding to the icon
sub-menu.

4.2.2 Application Setup

The Application can be customized for various user preferences.
Press the Softkey corresponding to the icon
to enter Configuration
The Configuration screen is now displayed.
Select the list item and press the Softkey
corresponding to the icon
as desired.
To return to the Application home screen, press
the button corresponding to the icon
The Counting Configurations are defined below (defaults in Bold).
Configure Item
Option(Bold is
default)
Auto Tare
Off/On
Accumulate
Off/
Manual/
Automatic
Auto Opt.
Off/On
to
to exit the
.
to change the setting
.
Description
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tared as a container
automatically.
Off: The icon "∑" does not display.
Manual: The Softkey "∑" displays. User can press the key to
accumulate the stable weight.
Automatic: The icon "∑" displays. The weight will be accumulated
automatically.
Note:
The load to be accumulated has to be >= 5d and the next accumulation
can only start once the pan has been cleared.
When LFT is ON (
mod is OIML
a. gross weight and net weight cannot be accumulated;
b. gross 0 has to be reached before a new sample accumulation.
When LFT is OFF,
a. gross weight and net weight can be accumulated;
b. a new sample can be accumulated after reaching gross 0 or net 0.
Off: Auto Opt. is off.
On: The APW will be optimized automatically during count weighing.
no such limit when LFT is OFF or the approve
),
EN-39

Publicité

Table des Matières
loading

Table des Matières