OHAUS Defender 5000 TD52P Mode D'emploi page 28

EN-26
3.6 Discrete I/O
Long press the button
Menu.
Select Application Mode by pressing the Softkey
corresponding to the icon
Press the Softkey corresponding to the icon
enter the sub-menu Application Mode.
Enable
The current selected application mode can't be set Off.
Discrete I/O setup menus allow the configuration of 2 inputs and 4 outputs depending on different
application mode.
Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
to enter the Main
.
to
Defender 5000 Indicators