Application Setup; Auto Tare; Accumulation - OHAUS Defender 5000 TD52P Mode D'emploi

Defender 5000 Indicators
Press the button
corresponding to Weighing is displayed in the
screen (this application is the default).
Press Tare or Zero if necessary to begin.
Place objects on the pan to display the weight. When
the reading is stable, the * appears.
The resulting value is displayed in the screen in the
active unit of measure.

4.1.1 Application Setup

The Application can be customized for various user preferences.
Press the button corresponding to the icon
The Configuration screen is now displayed.
Select the list item and press the Softkey
corresponding to the icon
setting as desired.
To return to the Application home screen, press
the Softkey corresponding to the icon
The Weighing Configurations are defined below (defaults in Bold)
Item Available Settings

Auto Tare

On, Off
Accumulate Off , Automatic, Manual
4.1.2 Auto Tare
Set the automatic tare.
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tare as a
container automatically.
Note: If the Security Switch is set to ON, Auto
Tare is locked at the current setting.

4.1.3 Accumulation

To start Accumulate weighing data, place the
object on the pan and press the Softkey
corresponding to
accumulation icon will start blinking. The load to be
accumulated has to be >= 10d and the next
accumulation can only start once the pan has been
cleared.
When LFT is ON (no such limitation when LFT is
OFF or LFT is ON and the approved mode is
OIML),
until the
to change the
.
Comments
To enable Automatic Tare
To enable Accumulation / Totalization
the icon .
icon
to enter Configuration
The
EN-35
.