Maintenance Configuration; Lock Key Configuration; Operation; Weighing - OHAUS Defender 5000 TD52P Mode D'emploi

EN-34
Please refer to Analog Configuration in the Defender

3.10 Maintenance Configuration

Please refer to Service Manual TD52P TD52XW indicator for Service Menu information.

3.11 Lock Key Configuration

This menu is used to lock access to certain keys. When you select ON for one selection, the
associated key press will be ignored.
If you select Lock All Keys, you will lose function of all keys.
If you select Lock Off key, you will lose function of the Off key.
Item Available Settings
(bold is the default settings)
Lock All Keys Off, On
Lock Off Key Off, On
Lock Zero Key Off, On
Lock Print Key Off, On
Lock Unit Key Off, On
Lock Soft Key Off, On
Lock Mode key Off, On
Lock Tare key Off, On
Lock Menu key Off, On
Reset
No/Yes
Note: If the Menu key has been locked, Please refer to Service Manual TD52P TD52XW indicator
for Service Menu information.

4. OPERATION

The scale can be configured to operate in up to 5 Application modes (Scale can be set to have 1 or
more Applications modes active). Press the button Mode to select an activated application. The
current application will be shown in the upper left corner of the home screen.
TD52 Indicator incorporates the following Applications:

Weighing

4.1 Weighing
Use this application to determine the weight of items in the selected unit of measure.
Counting Check
Weighing/Counting
Defender 5000 Indicators
®
5000 Analog Kit Instruction Manual.
Percent Dynamic