Technical Data; Installation - Zanussi ZBB28460SA Notice D'utilisation

1
2
1
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In-
stallation".

Technical data

Dimension of the recess
Rising Time
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.

Installation

Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
10
1. At the same time, with the fingers expand up
and down the transparent cover and unhook
it in the direction of the arrows.
2. Replace the lamp with one of the same pow-
er and shape, specifically designed for
household appliances. (the maximum power
is shown on the light bulb cover).
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door. Make sure that the light
comes on.
3. If necessary, replace the defective door
Height
Width
Depth
Climate
SN
N
ST
T
gaskets. Contact the Service Center.
1780 mm
560 mm
550 mm
22 h
230-240 V
50 Hz
Ambient temperature
class
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
www.zanussi.com