Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP 10: MATING SHEET ROCK TO THE
INSTALL BOARD
10a After securing the sheet rock to the studs as per normal
construction, mate the install board to the surrounding
sheet rock by driving a screw through the sheet rock
into the other end of the sheet rock clip behind it. For
easy reference, the clips will be directly across from the
locations used in step 8.
10b When bridging the joint in two pieces of sheet rock, be
sure to secure both to the clip. Example shown in the
magnified insert above.
17
Publicité
Chapitres
Table des Matières
