Controlling Playback Using Itunes; How To Use Connect; Dts Play-Fi And Apple Airplay Setup; Network Requirements - Martin Logan Crescendo X Mode D'emploi

CONTROLLING PLAYBACK USING iTUNES

To control playback (play/pause/volume) from
your speaker or remote control, follow these steps:
1. On your computer, launch iTunes (version
10.2.2 or later).
h
ow to use
You'll need Spotify Premium to use Connect, see
details overleaf.
1. Add your new device to the same wifi network
as your phone, tablet or PC (see product user
instructions for details).
2. Open the Spotify app on your phone, tablet or
PC, and play any song.
3. If you're using the app on a phone - tap the
song image in the bottom left of the screen. For
tablet and PC move to step 4.
dts P ‑f
lay I

NETWORK REQUIREMENTS

You must have the following to connect your wireless
product to your network:
• A wireless router.
• A high-speed internet connection for reliable
playback of internet based music services.
• Have your network password ready before
connecting the wireless product to your network.
TIP! If wireless connectivity is weak or not available,
connect to your router with an Ethernet cable. TIP! Your
wireless product communicates with wireless networks
that support 802.11g/n. For best performance, a
network that supports 802.11n wireless technology is
recommended. A network supporting 802.11b may be
used, but it will effectively stream to only one device
c
onnect
a
®
and PPle
2. Open "Preferences" and choose "Devices."
3. Check the box for "Allow iTunes audio control
from remote speakers" and click okay.
4. Tap the Connect icon
5. Pick your device from the list. If you can't see
it, just check it's connected to the same wifi
network as your phone, tablet or PC.
All done! Happy listening.
Licenses
The Spotify Software is subject to third party
licenses found here:
www.spotify.com/connect/third-party-licenses.
a P s
Ir lay etuP
equipped with DTS Play-Fi. Your wireless product
communicates over a 2.4 GHz wireless band, however,
it can become slow in locations, such as apartments,
where many routers are in operation. Consequently,
your wireless product is capable of jumping onto a 5
GHz band on dual band wireless routers.

DTS PLAY-FI APP REQUIREMENTS

• An Android device running Android 2.2 or later.
• An iOS device running iOS 6.0 or later.
• A Windows PC running Windows 7, 8 (32 and
64 bit), or later.
15