Installation - Martin Logan Statement 40XW Manuel D'installation

i
nstallation
STEP 1: CRUCIAL STEP! ATTACHING THE BOTTOM
BRACKET
1a Mark the desired bracket height from the floor on
the studs.
1b Ensure the bracket is level using the attached bubble
level. Once level, attach the bracket to the studs with
(4) included wood screws. Metal studs will require
different screws that are not included .
1c Apply (1) spacer to the top of the bracket as shown, by
peeling the backer off of the attached adhesive tape.
A simple and effective way to test for potential fitment
issues is to use one of the included back box mounting
brackets as a check gauge- placing it in the stud bay
and moving it over possible interferences. If anything
makes contact with the bracket, it will interfere with the
back box and must be relocated in order to use that
stud bay.
1d Repeat the steps above for any additional 40XW bottom
brackets, if installing multiples. Use a laser level to
ensure the speakers will be on the same plane once
installation is complete.
8