Hang The Sheet Rock - Martin Logan Statement 40XW Manuel D'installation

STEP 9: HANG THE SHEET ROCK
9a Hang the sheet rock on the stud wall. The opening
around the Fiberock® install board can be measured
and cut before application. Alternatively, sheet rock
can be loosely hung over the install board and then an
opening cut with a drywall saw using the perimeter of
the install board as a guide. If using this method, avoid
cutting into the sheet rock clips.
NOTE:The surfaces of the sheet rock and install
board will not be on the same plane . The clips
force the sheet rock to be proud of the install board
surface . This is done intentionally .
16